
FT1 all-in-one solar street light: 90-150 W, 190 lm/W, LiFePO4 52-90 Ah, IP65 die-cast body, 3-5 overcast-day backup. For municipal roads, parks and resorts.
A complete street light in one casting: the LED engine, LiFePO4 battery and MPPT controller sit inside the die-cast housing, and the mono panel brackets straight on top. There is no trench to dig and no cable to pull to the grid - two men, a pole and an hour of work per unit. Specified for municipal side roads, industrial parks, resort access roads and hotel car parks where mains power never reaches the kerb.
![]() | ![]() | ![]() | ![]() |
Key points for project buyers
• Self-contained - panel, battery and controller on one bracket, so there is no separate control cabinet to house or wire.
• LiFePO4 52-90 Ah rated for 3-5 overcast days, sized for monsoon and short-winter latitudes rather than lab conditions.
• Die-cast aluminium body, galvanised steel bracket and UV-resistant PC lens - IP65, so salt air, dust and driven rain are covered.
• MPPT charging recovers roughly 20% more harvest than PWM, which keeps the panel compact and the pole slim.
• One bracket interface across all three sizes - a 200-unit tender needs a single spare-parts list.
Specification — FT1 series
| Model | FT1-3M | FT1-4M | FT1-5M |
| Rated power | 90 W | 120 W | 150 W |
| Luminous efficacy | 190 lm/W | 190 lm/W | 190 lm/W |
| LED type & quantity | 135 pcs SMD3030 | 180 pcs SMD3030 | 225 pcs SMD3030 |
| Lamp body size | 887 x 400 x 65 mm | 1159 x 400 x 65 mm | 1436 x 400 x 65 mm |
| Solar panel | Mono 65 W (6 V/18 V) | Mono 85 W (6 V/18 V) | Mono 105 W (6 V/18 V) |
| Panel size | 882 x 396 mm | 1154 x 396 mm | 1431 x 396 mm |
| Battery | LiFePO4 52 Ah | LiFePO4 75 Ah | LiFePO4 90 Ah |
| Charging time | 4-6 h effective sun | 4-6 h effective sun | 4-6 h effective sun |
| Backup on overcast days | 3-5 days | 3-5 days | 3-5 days |
| Control | Intelligent light control + push-button switch (radar sensor optional) | Intelligent light control + push-button switch (radar sensor optional) | Same |
| Body material | Die-cast aluminium + galvanised steel sheet | Die-cast aluminium + galvanised steel sheet | Same |
| Lens | PC, UV-resistant, flame-retardant | PC, UV-resistant, flame-retardant | Same |
| IP rating | IP65 | IP65 | IP65 |
| Mounting height | 5-7 m | 6-8 m | 7-9 m |
Specifications are taken from the printed data sheet for the FT1 series. Pole, bracket and battery sizing can be adjusted to the project; on a phone, scroll the table sideways.
Typical applications
Municipal side roads, industrial park roads, resort access roads, hotel car parks, township main streets, park paths.
OEM branding, pole brackets and project quantities are available: send the mounting height, the nightly runtime and the quantity, and we will confirm the model with the matching panel and battery.
